返回主站 | 设为首页 | 加入收藏      
   
 
  首页 关于我们 产品展示 方案设计 技术分享 行业资讯 联系我们  
 
方案设计
蓝牙耳机方案
蓝牙音箱方案
DC/DC升压+音频组合方案
功放IC
电源管理IC
马达驱动IC/步进电机控制芯片
数模(DAC)/模数(ADC)转换芯片
音量控制IC
触摸屏控制IC
LED照明驱动IC
锁相环IC
无线收发IC
功率半导体器件
视频IC
HDMI IC
FM解调IC
USB声卡IC
LCD显示驱动IC
模拟开关阵列IC
STN Driver IC
电容式触摸感应IC
RGB LED呼吸趣味灯驱动IC
音频CODEC IC
TFT-LCD 时序控制IC
Lightning闪电数据接口IC
TFT-Driver IC
电压电平转换器
运算放大器
 
名称:
种类:
类别:

业务洽谈:

联系人:张顺平 
手机:17727550196(微信同号) 
QQ:3003262363
EMAIL:zsp2018@szczkjgs.com

联系人:姚红霞 
手机:17727550195 (微信同号)
QQ:3003214837
EMAIL:3003214837@qq.com

负责人联络方式:
手机:13713728695(微信同号) 
QQ:3003207580 
EMAIL:panbo@szczkjgs.com
联系人:潘波

 
当前位置:首页 -> 技术分享
ADAU1850三输入有DSP功能的CODEC解决方案
文章来源:永阜康科技 更新时间:2021/8/20 14:47:00

ADI公司的ADAU1850是具有三个输入和一个输出的集成了数字信号处理器的编译码器(CODEC).从模拟输入到DSP核到模拟输出的通路经过优化,具有低等待时间,非常适合于降噪音耳机使用.只需要增加少许无源元件, ADAU1850提供了完整的耳机解决方案. ADAU1850具有可编程的FastDSP音频处理引擎,高达768kHz取样速率,具有Biquad滤波器,限幅器,音量控制和混合等功能,低等待时间的24位ADC和DAC,106dB SNR(信号通过ADC和A加权滤波器),串口取样速率从8kHz到768kHz,模拟到模拟群时延为5 μs,可编程双精度MAC引擎用于13级均衡器,3个模拟输入(2个差分和一个单端),可配置成麦克风或线输入.模拟差分风音频输出,可配置成线路输出或耳机驱动器,PLL支持30 kHz到27 MHz的任何输入时钟,1路ASRCI,三路ASRCO,串行音频端口支持I2S,左对齐,或高达16路TDM (TDM16),具有灵活路经的两个插值器和4个抽取器.模拟AVDD电源电压为1.8V.数字I/O IOVDD电压为1.8V到3.3V.通信接口为I2C,SPI和UART.采用28点0.4mm间隔2.957 mm × 1.757 mm WLCSP封装.主要用在降噪手机和耳机,蓝牙有源降噪(ANC)手机和耳机,PND,数字照相机和摄影机,乐器效果处理器,多媒体扬声器系统和智能手机.本文介绍了ADAU1850主要特性,功能框图和模拟性能指标,以及评估板EVALADAU1850EBZ主要特性,框图,电路图和材料清单.

The ADAU1850 is a codec with three inputs and one output thatincorporates one digital signal processor. The path from the analoginput to the DSP core to the analog output is optimized for low latencyand is ideal for noise canceling earphones. With the additionof a few passive components, the ADAU1850 provides a completeheadset solution.

The ADAU1850 is provided in a small, 28-ball, 2.957 mm × 1.757mm wafer level chip scale package (WLCSP).

ADAU1850主要特性:

► Programmable FastDSP audio processing engine

► Up to 768 kHz sample rate

► Biquad filters, limiters, volume controls, mixing

► Low latency, 24-bit ADCs and DAC

► 106 dB SNR (signal through ADC with A-weighted filter)

► 110 dB combined SNR (signal through DAC and headphonewith A-weighted filter)

► Serial port sample rates from 8 kHz to 768 kHz

► 5 μs analog-to-analog group delay

► Programmable, double precision MAC engine for 13-stageequalizer

► 3 analog inputs (2 differential and 1 single-ended), configurableas microphone or line inputs

► Analog differential audio output, configurable as either line outputor headphone driver

► PLL supporting any input clock rate from 30 kHz to 27 MHz

► 1-channel ASRCI, 3-channel ASRCO

► Serial audio ports supporting I2S, left justified, or up to 16-channelTDM (TDM16)

► 2 interpolators and 4 decimators with flexible routing

► Power supplies

► Analog AVDD at 1.8 V

► Digital I/O IOVDD at 1.8 V to 3.3 V

► Headphone HPVDD at 1.8 V

► Headphone HPVDD_L at 1.2 V to1.8 V

► Control/communication interfaces

► I2C, SPI, or UART

► 28-ball, 0.4 mm pitch, 2.957 mm × 1.757 mm WLCSP

ADAU1850应用:

► Noise canceling handsets, headsets, and headphones

► Bluetooth active noise canceling (ANC) handsets, headsets, andheadphones

► Personal navigation devices

► Digital still and video cameras

► Musical instrument effect processors

► Multimedia speaker systems

► Smartphones

 

图1.ADAU1850功能框图

ADAU1850模拟性能指标:

 

 

 

 

 

评估板EVALADAU1850EBZ

Evaluating the ADAU1850 Three ADCs, One DAC, Low Power Codec with Audio/Fast DSP

This user guide explains the design and setup of the EVALADAU1850EBZevaluation board.

This evaluation board provides access to all analog and digitalinputs/outputs on the ADAU1850. The ADAU1850 core is controlledby Analog Devices, Inc., Lark Studio™ software, which interfacesto the EVAL-ADAU1850EBZ via a USB connection. The softwaredevelopment kit (SDK) is also provided by Analog Devices for codedevelopment.

The EVAL-ADAU1850EBZ can be powered by the USB bus or bya single 3.8 V to 5 V supply. These supply options are regulatedto the voltages required on the EVAL-ADAU1850EBZ. The printedcircuit board (PCB) is a 4-layer design, with a ground plane anda power plane on the inner layers. The EVAL-ADAU1850EBZcontains connectors for external microphones and speakers. Themaster clock can be provided externally or by the on-board 24.576MHz oscillator.

评估板EVALADAU1850EBZ包括:

► EVAL-ADAU1850EBZ evaluation board

► USB cable with mini USB plug

评估板EVALADAU1850EBZ需要文件:

► ADAU1850 data sheet

► EVAL-ADAU1850EBZ user guide

 

图2.评估板EVALADAU1850EBZ外形图

 

图3.评估板EVALADAU1850EBZ框图

 

图4.评估板EVALADAU1850EBZ电路图

评估板EVALADAU1850EBZ材料清单:

 



 
 
 
    相关产品  
 
深圳市永阜康科技有限公司 粤ICP备17113496号  服务热线:0755-82863877 手机:13242913995